Practica 20

R1

Router>ena
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int g0/0
Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
Router(config-if)#int s0/0/0
Router(config-if)#ip add 10.10.10.1 255.255.255.252
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down
Router(config-if)#ex
Router(config)#hostname R1
R1(config)#router eigrp 100
R1(config-router)#network 192.168.1.0
R1(config-router)#network 10.10.10.0
R1(config-router)#

R2

Router>ena
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int g0/0
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#no shut
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
Router(config-if)#int s0/0/0
Router(config-if)#ip address 10.10.10.2 255.255.255.252
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
Router(config-if)#ex
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Router(config)#hostname R2
R2(config)#router eigrp 100
R2(config-router)#network 192.168.2.0
R2(config-router)#network 10.10.10.0
R2(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 10.10.10.1 (Serial0/0/0) is up: new adjacency

Ping

Archivo